Abstract

The proposed voltage source converter is composed of a series double bridge converter with an auxiliary circuit. The auxiliary circuit injects DC voltage via the mid point of the double bridge converter. The injection ratio and frequency are chosen to convert the standard 12-pulse into 60-pulse configuration without PWM or increasing the number of bridges, thus the voltage and current harmonic can fulfill the THD limit without a conventional filter. The converter is operated under fundamental frequency for the main bridges, thus its switching lose is low. The converter can be widely used in the STATCOM and HVDC system. The paper describes the principles and control strategies of the proposed converter. The operational feasibility of the proposed converter is verified by computer simulation using the PSCAD/EMTDC package.

Submitted: June 11, 2007 · Accepted: September 11, 2007 · Published: November 21, 2007

Recommended Citation

Pan, Wulue; Xu, Zheng; and Zhang, Jing (2007) "Novel Configuration of 60-Pulse Voltage Source Converter for STATCOM Application," International Journal of Emerging Electric Power Systems: Vol. 8 : Iss. 5, Article 7.
Available at: http://www.bepress.com/ijeeps/vol8/iss5/art7