Abstract

An external liquid circulation is introduced into a traditional internal loop reactor in order to improve liquid circulation and increase the interface between gas and liquid phases. The effects of superficial gas velocity and external liquid circulation velocity on local and overall gas holdups are explored experimentally and numerically in the loop section of a combined gas-liquid contactor, which consists of a liquid spray, sieve plates and an internal loop with external liquid circulation. Local gas holdup is measured experimentally by a double-sensor conductivity probe. Numerical simulations are conducted in the platform of a commercial software package, ANSYS CFX 10.0. Gas holdup and other information are obtained by solving the governing equations of mass and momentum balances for gas and liquid phases in a hybrid mesh system. Both measured and simulated results indicate that local, section-averaged, and overall gas holdups increase with an increase of the superficial gas velocity. The downcomer tube for circulating external liquid has a significant influence in the gas-distributor and the downcomer-tube action regions rather than in the upper draft-tube and the gas-liquid separation regions. Good agreement between measured and predicted data suggests that CFD simulation together with experimental investigation can be employed to develop novel gas-liquid contactors with a complex geometrical configuration.

Recommended Citation

Lu, Chunxi; Qi, Nana; Zhang, Kai; Jin, Jiaqi; and Zhang, Hu (2009) "Experiment and CFD Simulation on Gas Holdup Characteristics in an Internal Loop Reactor with External Liquid Circulation," International Journal of Chemical Reactor Engineering: Vol. 7: A3.
Available at: http://www.bepress.com/ijcre/vol7/A3